Installation
INSTALLATION
1. Install the brace (1) to the vehicle.
2. Install the bolts (2) to the vehicle.
NOTE: Final torque must be made at curb weight.
3. Lower the vehicle.
4. Tighten the bolts to 60 Nm (44 ft. lbs.).
INSTALLATION
1. Install the brace (1) to the vehicle.
2. Install the bolts (2) to the vehicle.
NOTE: Final torque must be made at curb weight.
3. Lower the vehicle.
4. Tighten the bolts to 60 Nm (44 ft. lbs.).