LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Garage Door Opener Transmitter >> Service and Repair >> Universal Transmitter - Removal

Universal Transmitter - Removal







REMOVAL





1. Disconnect the negative battery cable.
2. Using a plastic wedge, slide the wedge under the Universal Garage Door Opener/Tire Pressure Monitor module and the headliner and pry the Universal Garage Door Opener/Tire Pressure Monitor module away from the headliner.
3. Disconnect the Universal Garage Door Opener/Tire Pressure Monitor module harness connector.
scientia non olet · About LEMON Manuals