1000 - 1999: 1876

1876-00 INCORRECT CAN MESSAGE FROM ABS









For a complete Shift Lever Assembly Circuit Diagram, [1][2]Automatic Transmission/Transaxle.

Diagnostic Test

1. CAB - INTERNAL
Turn the ignition off.
Replace the Controller Antilock Brake Module. Removal.
Turn the ignition on.
With the scan tool, erase SLA DTCs.
Start the engine.
With the brakes firmly applied, place the shift lever into Drive.
With the scan tool, read SLA DTCs.
Did DTC INCORRECT CAN MESSAGE FROM ABS set again?

Yes

- Replace the Shift Lever Assembly. Manual Transmission/Transaxle - Removal.
- Perform NAG1 TRANSMISSION VERIFICATION TEST. Transmission Verification Test

No

- Test Complete.