LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Instrument Cluster - Service Information >> Removal >> Instrument Cluster - LHD

Instrument Cluster - LHD

Fig 1: Removing/Installing Instrument Cluster
GC0035206Courtesy of CHRYSLER LLC
Fig 2: Identifying Cluster Cover & Lower Panel
GC0032410Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. Refer to REMOVAL .
  3. Remove the lower instrument panel cover (2).
    Fig 3: Identifying Instrument Cluster Cover
    GC0032376Courtesy of CHRYSLER LLC
  4. Remove the Instrument Cluster outer bezel (1).
    NOTE: To ease the removal of the Instrument Cluster outer bezel, carefully pry the bezel from the top edge to disengage the retaining tabs from the Instrument Panel.
  5. Remove the retaining screws from Instrument Cluster.
  6. Rotate the Instrument Cluster away from the Instrument Panel.
  7. Disconnect the Instrument Cluster harness connectors from the back of the Instrument Cluster.
  8. Remove the Instrument Cluster from the vehicle.
scientia non olet · About LEMON Manuals