LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Instrument Panel >> Pad-Instrument Panel Top >> Removal >> Instrument Panel Top Cover

Instrument Panel Top Cover

Fig 1: SPEAKER GRILLE
GC0060767Courtesy of CHRYSLER LLC
  1. Remove A-pillar trim. Using a trim stick C-4755 or equivalent, gently pry out and remove. See REMOVAL .
  2. Using a trim stick or equivalent, disengage clips holding speaker grille (1) to instrument panel.
  3. Remove defroster grille (1). See REMOVAL .
  4. Using a trim stick or equivalent, remove passenger bezel.
    Fig 2: TOP COVER
    GC0060768Courtesy of CHRYSLER LLC
  5. Remove five top pad fasteners. Three fence fasteners and two located under passenger bezel.
    CAUTION: The Instrument Panel Top pad may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.
  6. Remove the airbag fasteners from the instrument panel reinforcement. Refer to REMOVAL .
  7. Pull top cover rearward to disengage hooks holding front of top cover to instrument panel.
  8. Remove top cover from vehicle.
NOTE: If replacing the top pad, transfer the passenger airbag to the new top pad. Refer to REMOVAL .