LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior (Service Information) >> Weatherstrip/Seals >> Header / A-Pillar Weatherstrip >> Removal

Header / A-Pillar Weatherstrip: Removal

Fig 1: Removing/Installing Header/A-Pillar Weatherstrip
GC0033450Courtesy of CHRYSLER LLC
  1. Using a trim stick or other suitable device, carefully pry up the inner edge.
  2. Grasp the edge of the weatherstrip and pull outward to remove the seal from the a-pillar and header.
scientia non olet · About LEMON Manuals