LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior (Service Information) >> Stationary Glass >> Quarter Window >> Removal

Quarter Window: Removal

Fig 1: Positioning Aside Weatherstrip
GC0066817Courtesy of CHRYSLER LLC
WARNING: Wear eye and hand protection when handling glass. Personal injury can result.
  1. Position aside weatherstrip (3).
  2. Cut urethane bonding from around quarter window glass (1) using a suitable sharp cold knife (2). A pneumatic cutting device can be used if available.
    CAUTION: Do not damage body or trim finish when cutting out glass or applying fence primer.
  3. Remove quarter glass screws (4).
  4. Separate glass (1) from vehicle.