LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior (Service Information) >> Diagnosis And Testing >> Wind Noise Testing >> Road Testing Wind Noise

Road Testing Wind Noise

  1. Drive the vehicle to verify the general location of the wind noise.
  2. Apply a 50 mm (2 in.) piece of masking tape in 150 mm (6 in.) lengths along the weatherstrips, weld seams or moldings. After each length is applied, drive the vehicle. If noise goes away after the piece of tape is applied, remove the tape, locate, and repair the concern.
scientia non olet · About LEMON Manuals