LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Seats >> Cushion/Cover-Cushion - Front >> Removal

Cushion/Cover-Cushion - Front: Removal

Fig 1: Cushion Nuts
GC0013545Courtesy of CHRYSLER LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
  2. Move the seat to the forward position and disconnect and isolate the batter negative cable.
  3. Remove the bolts (2) and the clamps (1) and remove the seat cushion.
  4. Disconnect the electrical connector, if equipped.
    Fig 2: Zip Strip
    GC0013546Courtesy of CHRYSLER LLC
  5. Separate the j-straps (1 & 2) and seat cushion cover and foam.
scientia non olet · About LEMON Manuals