LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Switch Pod-Instrument Panel >> Removal >> Switch Pod - Instrument Panel

Switch Pod - Instrument Panel

Fig 1: Screws
GC0016054Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  2. Remove the instrument panel center bezel. Refer to REMOVAL .
  3. Remove the two screws (1) from the rear of the switch pod.
  4. Separate switch from center bezel.
scientia non olet · About LEMON Manuals