LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Removal >> Instrument Cluster

Instrument Cluster

Fig 1: Instrument Cluster Bezel
GC0016049Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  2. Remove the instrument cluster bezel. Refer to REMOVAL .
  3. Remove the four cluster retaining screws.
  4. Disconnect the cluster electrical connectors.
  5. Remove cluster from instrument panel.
scientia non olet · About LEMON Manuals