Guide-Sunroof Glass: Removal

Fig 1: Channel Arm

Courtesy of CHRYSLER LLC

Place the sunroof in the vent position.
Remove the sunroof assembly. See REMOVAL .
Remove the motor. Refer to REMOVAL .
Remove the glass. See REMOVAL .
Remove the wind deflector. See REMOVAL .
Separate the drain channel arms (2) from the guide mechanisms (1) one at a time.
CAUTION: Do not pry the channel arms apart at the same time or you could break the drain channel.
Slide the drain channel rearward out of the way.

Fig 2: Hard Stop Screw
Courtesy of CHRYSLER LLC
Remove the hard stop screw from the frame.

Fig 3: Removing/Installing Guide Plate
Courtesy of CHRYSLER LLC
Push the drive cable and guide plate forward past the hard stop screw location until the glass guide comes loose.

Fig 4: Removing/Installing Guide Plate
Courtesy of CHRYSLER LLC
Rotate the guide (1) up and out of the front beam (3) and release the front foot (2) from the channel guide.