LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Stationary Glass >> Windshield >> Removal

Stationary Glass: Windshield: Removal

Fig 1: Adhesive Separation
GC0010646Courtesy of CHRYSLER LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
  2. Remove the rear view mirror. See REMOVAL .
  3. Remove the cowl grille. See REMOVAL .
    CAUTION: Be careful not to damage painted surfaces when removing moldings or cutting urethane around the windshield.
  4. Remove the windshield side moldings.
  5. Using an assistant and a wire-type windshield cut-out tool (1, 3 and 4), cut and separate the urethane adhesive (2) securing the windshield to the windshield fence.
  6. Carefully remove the windshield from the vehicle.
scientia non olet · About LEMON Manuals