LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats >> Riser-Front >> Removal >> Manual Length Adjuster

Manual Length Adjuster

Fig 1: Passenger Seat Manual Track
GC0013581Courtesy of CHRYSLER LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. See WARNING .
  2. Remove the seat. See REMOVAL .
  3. Move the seat to the forward position on the tracks and remove the seat adjuster bolts/nuts (3).
  4. Move the seat to the reward position on the tracks and remove the front seat adjuster bolts/nuts (3).
    NOTE: Passenger seat with strain gauges shown, drivers side seat similar.
  5. Disconnect strain gauge electrical connectors (1), if equipped.
  6. If equipped, remove the strain gauge bolts (2) and remove the strain gauges as necessary.
scientia non olet · About LEMON Manuals