Instrument Panel: Bezel-Cluster: Removal: CHRYSLER

Fig 1: Bezel-Ignition Switch (Chrysler)

Courtesy of CHRYSLER LLC

1. Before proceeding with the following repair procedure, review all warnings and cautions.
2. Using a trim stick C-4755 or equivalent (1), gently pry between the ignition switch bezel (2) and the instrument cluster bezel (3) to release the snap retainers that secure the switch bezel.
3. Remove the ignition switch bezel from the vehicle.
   Fig 2: Bezel-Cluster Remove (Chrysler)

   Courtesy of CHRYSLER LLC
4. Using a trim stick C-4755 or equivalent (1), gently pry between the instrument panel (2) and the cluster bezel (3) to release the snap clip retainers that secure the cluster bezel.