LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Door - Rear >> Hinge >> Removal

Door - Rear: Hinge: Removal

Fig 1: Hinge Brackets
GC0013401Courtesy of CHRYSLER LLC
  1. Remove the rear door from the vehicle. See REMOVAL .
  2. Mark the upper (2) or lower (4) hinge bracket location on the outside of the lower B-pillar (1) to aid reinstallation.
  3. Remove the two screws (3) that secure the hinge bracket to the outside of the lower B-pillar.
  4. Remove the hinge bracket from the B-pillar.
    Fig 2: Door Hinges
    GC0013402Courtesy of CHRYSLER LLC
  5. Mark the upper (1) or lower (4) door hinge location on the hinge face of the rear door (3) to aid reinstallation.
  6. Remove the screw (6) that secures the hinge to the door.
  7. Remove the nut (5) that secures the hinge to the stud (2) on the door.
  8. Remove the upper or lower hinge from the hinge face of the door.