LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Door - Rear >> Glass Run Channel >> Removal

Glass Run Channel: Removal

Fig 1: Rear Door Glass Channel & Bracket
GC0013400Courtesy of CHRYSLER LLC
  1. Remove the trim panel from inside of the rear door. See REMOVAL .
  2. Remove the watershield from the inside of the rear door. See REMOVAL .
  3. Loosen the two screws (1) that secure the rear door glass channel and bracket (2) to the inside of the rear door.
  4. Disengage the two screws from the keyed holes near the back of the inner door panel and remove the channel and bracket from the interior of the rear door.
scientia non olet · About LEMON Manuals