LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Door - Front >> Lock Cylinder >> Removal

Lock Cylinder: Removal

Fig 1: Door Lock Cylinder
GC0013378Courtesy of CHRYSLER LLC
NOTE: A door lock cylinder is used only on the driver side front door exterior handle.
  1. Remove the handle (1) from the outside of the driver side front door. See REMOVAL .
  2. Using hand pressure, push on the face of the lock cylinder (2) until it pops out of the cavity in the back of the door handle.
scientia non olet · About LEMON Manuals