LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior >> Interior >> Upper B-Pillar Trim >> Removal

Upper B-Pillar Trim: Removal

  1. Remove the door opening weatherstrips. (Refer to BODY/WEATHERSTRIP/SEALS/DOOR OPENING WEATHERSTRIP - REMOVAL) 
  2. Pry shoulder belt knob straight off height adjuster using a trim stick (C-4755).
  3. Remove seat belt turning loop cover.
  4. Remove bolt attaching turning loop to height adjuster.
  5. Remove bolt attaching seat belt lower anchor to floor.
  6. Disengage clips attaching upper B-pillar trim to B-pillar.
  7. Remove upper B-pillar trim from vehicle. See Figure.
scientia non olet · About LEMON Manuals