Instrument Panel Top Cover: Removal
- Remove A-pillar trim. Using a trim stick (special tool #C-4755) or equivalent, gently pry out and remove.
- Using a trim stick, disengage clips holding rear edge of top cover to instrument panel. See Fig 1.NOTE: The Instrument Panel Top Cover may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.
- Pull top cover rearward to disengage hooks holding front of top cover to instrument panel.
- Remove top cover from vehicle.
| 1 - CLIPS |
| 2 - INSTRUMENT PANEL TOP COVER |
| 3 - INSTRUMENT PANEL PAD |
| 4 - INSTRUMENT PANEL ASSEMBLY |