LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Weatherstrip/Seals >> Drip Rail Weatherstrip >> Removal

Drip Rail Weatherstrip: Removal

  1. Open front and rear doors.
  2. Remove two screws. See Fig 1.
    Fig 1: Splash Shield
    GC0031549Courtesy of DAIMLERCHRYSLER CORP.
    1 - FASTENERS
    2 - SPLASH SHIELD
    3 - DRIP RAIL WEATHERSTRIP
  3. Position splash shield out of way.
  4. Starting at the bottom of the A-pillar, pull the drip rail weatherstrip from the windshield side molding.
  5. Pull the drip rail weatherstrip from the roof rail pinch flange above door openings.
  6. Remove drip rail weatherstrip from vehicle. See Fig 2.
Fig 2: Drip Rail Weatherstrip
GC0031548Courtesy of DAIMLERCHRYSLER CORP.
1 - DRIP RAIL
2 - DRIP RAIL WEATHERSTRIP
scientia non olet · About LEMON Manuals