A-Pillar Weatherstrip Retainer And Molding: Removal

1. Partially raise convertible top.
2. Remove header and A-pillar weatherstrip as necessary to gain access.
3. Remove screws holding A-pillar weatherstrip retainer to A-pillar. See Fig 1.
4. Remove retainer from vehicle.
5. Remove screws attaching A-pillar molding to A-pillar.
6. Remove A-pillar molding from vehicle.

Fig 1: A-Pillar Weatherstrip Retainer

Courtesy of DAIMLERCHRYSLER CORP.

1 - A-PILLAR WEATHERSTRIP RETAINER

2 - HEADER

3 - A-PILLAR