LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Seats >> Rear Seat Cushion Cover >> Removal >> Removal - Jr-27 Only

Removal - Jr-27 Only

  1. Remove rear seat cushion from vehicle (Refer to BODY/SEATS/SEAT CUSHION - REMOVAL) .
  2. Place seat cushion on a suitable work surface in inverted position.
  3. Remove hog rings around perimeter of seat cushion attaching seat cushion cover to seat cushion frame.
  4. Pull seat cover from seat cushion frame and seat cushion foam.
  5. Remove hog rings attaching seat cover seam wires to seat foam wires.
  6. Remove seat cover from seat frame and seat cushion foam.
scientia non olet · About LEMON Manuals