LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Seats >> Rear Seat Back Cover >> Removal >> Removal - Jr-27 Only

Removal - Jr-27 Only

  1. Remove rear seat back from vehicle (Refer to BODY/SEATS/REAR SEAT BACK - REMOVAL) .
  2. Place seat back on a suitable work surface in inverted position.
  3. Remove hog rings around perimeter of seat back holding seat back cover to seat back frame.
  4. Pull seat cover from seat back frame and seat back foam.
  5. Remove any hog rings holding seat cover seam wires to seat foam wires.
  6. Remove seat cover from seat frame and seat back foam.
scientia non olet · About LEMON Manuals