LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Seats >> Front Seat >> Removal >> Removal - Power - Jr-27

Removal - Power - Jr-27

  1. Move seat to full forward position.
  2. Remove rear inboard bolt attaching seat to floor pan.
  3. Remove rear outboard bolts attaching seat to side sill pylon.
  4. Position seat in full rearward position.
  5. Remove front inboard and outboard bolts attaching seat to floor pan crossmember. See Figure.
  6. Tilt seat rearward and disconnect wire connector to seat belt pretensioner and power seat mechanism.
  7. Remove seat from vehicle.
scientia non olet · About LEMON Manuals