LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Interior >> Upper Deck Molding >> Removal

Upper Deck Molding: Removal

  1. Lower convertible top to midway position.
  2. Remove screws attaching upper deck molding to rear deck panel above convertible top rear attachment.
  3. Open decklid.
  4. Remove screws attaching upper deck molding to rear deck panel inside decklid water trough.
  5. Disconnect wire connector for CHMSL.
  6. Remove upper deck molding from vehicle.
scientia non olet · About LEMON Manuals