Left Lower Instrument Silencer Panel: Removal
- Remove end cap.
- Remove power mirror switch bezel.
- Disconnect wirer connector from power mirror switch.
- Remove five screws to the left lower instrument panel trim and disconnect wire connector.
- Remove push in fastener and stamp nut. See Fig 1.
- Using rearward motion pull the left lower silencer panel from the instrument panel and remove.
| 1 - LEFT LOWER INSTRUMENT PANEL TRIM |
| 2 - HVAC SILENCER ATTACHING STUD |
| 3 - STAMP NUT |
| 4 - PUSH IN FASTENER |
| 5 - LEFT LOWER SILENCER PANEL |