Instrument Panel Outboard Bezel: Removal

1. Disconnect and isolate the battery negative remote cable.
2. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the instrument panel outboard switch bezel. See Fig 1.
3. Disconnect the wire connector.
4. Remove bezel from vehicle.
5. Push in the sides of the power mirror switch to release it from the bezel.

Fig 1: Instrument Panel Outboard Switch Bezel

Courtesy of DAIMLERCHRYSLER CORP.

1 - WIRE CONNECTORS

2 - OUTBOARD SWITCH BEZEL