Left Front Wheelhouse Splash Shield: Removal

1. Remove left front wheel. (Refer to TIRES/WHEELS - REMOVAL)
2. Remove the seven push pin fasteners, the three screws, and remove the transmission splash shield. See Fig 2.
3. Remove the fender trim. See Fig 1.
4. Remove the four push pin fasteners and remove the wheelhouse splash shield. See Fig 3.

Fig 1: Fender Trim - Typical

Courtesy of DAIMLERCHRYSLER CORP.

1 - SCREWS

2 - FENDER TRIM

Fig 2: Transmission Splash Shield

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPLASH SHIELD

2 - PUSH PIN FASTENERS

Fig 3: Wheelhouse Splash Shield

Courtesy of DAIMLERCHRYSLER CORP.

1 - WHEELHOUSE SPLASH SHIELD

2 - PUSH PIN FASTENERS