LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Doors - Rear >> Latch Striker >> Removal

Latch Striker: Removal

  1. Mark outline of door latch striker on C-pillar to aid installation.
  2. Remove screws attaching door latch striker to C-pillar. See Fig 1.
  3. Remove door latch striker from vehicle.
NOTE: Be sure to check for any shims between door latch striker and C-pillar. If any shims are found, they must be reinstalled with the new door latch striker to maintain proper door operation.
Fig 1: Rear Door Latch Striker
GC0031401Courtesy of DAIMLERCHRYSLER CORP.
1 - SHIM
2 - STRIKER
3 - QUARTER PANEL