LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior >> Door - Front >> Latch Striker >> Removal

Latch Striker: Removal

  1. Mark outline of door latch striker on B-pillar to aid in installation.
  2. Remove screws attaching door latch striker to B-pillar. See Fig 1.
  3. Remove latch striker from vehicle.
NOTE: Be sure to check for any shims between door latch striker and B-pillar. If any shims are found, they must be reinstalled with the new door latch striker to maintain proper door operation.
Fig 1: Door Latch Striker
GC0031373Courtesy of DAIMLERCHRYSLER CORP.
1 - B-PILLAR
2 - SHIM
3 - DOOR LATCH STRIKER