Specifications - Body Gap And Flush Measurements - Jr-41

INDEX

DESCRIPTION	FIGURE
BODY GAP AND FLUSH MEASUREMENTS	Fig 1.

Fig 1: Body Gap And Flush Measurements

Courtesy of DAIMLERCHRYSLER CORP.

	LOCATION	GAP	FLUSH
1	Fascia to Hood	6.0 Blending to 8.0 +/- 2.5 Parallel within 2.5	1.6 Under Flush +/- 2.5 Consistent within 2.5
2	Headlamp to Hood	8.0 +/- 2.5 Parallel within 2.0	7.0 Blending to 4.0 +/- 1.5
3	Hood to Fender	4.0 +/- 1.0 Parallel within 1.5	0.5 Under Flush +/- 1.5 Consistent within 1.5
4	Fender to Front Door	5.0 +/- 1.0 Parallel within 2.5	0.8 Over Flush +/- 1.5 Consistent within 2.0
5	Front and Rear Doors to Roof	6.0 +/- 1.5 Parallel within 2.0	Front Door 2.2 Over Flush +/- 2.0 Rear Door Flush +/- 2.0 Consistent within 1.5
6	Front Door to Rear Door	5.0 +/- 1.0 Parallel within 1.5	Flush +/- 1.5 Consistent within 2.0
7	Rear Door to Quarter Panel	4.5 +/- 1.0 Parallel within 1.5	Flush +/- 1.5 Consistent within 2.0
8	Fuel Filter Door to Quarter Panel	3.0 +/- 0.75 Uniform within 1.0	0.5 Under Flush +/- 1.0
9	Front and Rear Doors at Sill	6.0 +/- 1.5 Parallel within 2.0	Front Door 5.5 Under Flush Rear Door 6.5 Under Flush +/- 1.5 Consistent within 2.5
10	Deck Lid to Quarter Panel	4.5 +/- 1.0 Parallel within 1.0	Flush +/- 1.5 Consistent within 1.5
11	Tail Lamp to Deck Lid	4.9 +/- 1.5 LH & RH to be within 2.0	0.5 Over Flush to 0.5 Under Flush +/- 2.0
12	Fascia to Deck Lid	6.3 to 7.0 +/- 2.0 Parallel within 2.0	0.3 Under Flush to 0.3 Over Flush +/- 2.0 Consistent within 2.0
NOTE: NOTE: ALL MEASUREMENTS ARE IN mm