Vehicle Speed Sensor: Installation

Fig 1: Speed Sensor And Pinion Removal/Installation

GC0020066

Courtesy of DAIMLERCHRYSLER CORP.

1 - CONNECTOR

2 - SENSOR

3 - O-RING

4 - SPEEDO PINION

Install pinion gear to speed sensor (1). See Fig 1.
Using a NEW o-ring (3), install the speed sensor (2) to the transaxle.
Install the bolt and torque to 7 N.m (60 in. lbs.).
Connect speed sensor connector (1).
Lower vehicle and road test to verify proper speedometer operation.