Gear Shift Mechanism: Removal
Courtesy of DAIMLERCHRYSLER CORP.
- Pull up on gearshift knob (1) with moderate force to remove from gearshift mechanism. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove shifter boot/bezel assembly (1) from console by lifting up at mounting ring area. See Fig 2.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove the center console assembly (1). See Fig 3. Remove rear power window switch (if equipped) and disconnect harness from console.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - GROMMET PLATE NUT |
| 2 - SHIFTER |
| 3 - CROSSOVER CABLE |
| 4 - CLIP |
- Remove crossover cable retaining clip (4) and disconnect from shift lever. See Fig 4.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - SHIFTER |
| 2 - CLIP |
| 3 - SELECTOR CABLE |
- Remove selector cable retaining clip (2) and disconnect from shift lever. See Fig 5.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove four shifter assy. (1) to floor pan nuts and remove shifter from vehicle. See Fig 6.