LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> T350 Manual Transmission - Diagnosis & Testing & Overhaul >> T350 Manual Transaxle >> Back-Up Lamp Switch >> Installation

Back-Up Lamp Switch: Installation

Fig 1: Back-Up Lamp Switch & Connector
GC0019939Courtesy of DAIMLERCHRYSLER CORP.
1 - CONNECTOR
2 - BACK UP LAMP SWITCH

Install back-up lamp switch (2). See Fig 1. Teflon tape or equivalent must be used on switch threads. Tighten switch to 24 N.m (18 ft. lbs.) torque.

CAUTION: Do not overtighten switch.
  1. Connect back-up lamp switch connector (1).
  2. Lower vehicle.
  3. Verify back-up lamp operation.
scientia non olet · About LEMON Manuals