Diesel And Turbo Models

NOTE: To prevent drainage of clutch master cylinder assembly upon slave cylinder removal, it is necessary to make sure brake master cylinder fluid level is full and reservoir cap is installed tight.

Fig 1: Removing/Installing Concentric Slave Cylinder (CSC)

Courtesy of DAIMLERCHRYSLER CORP.

1 - CONCENTRIC SLAVE CYLINDER

Remove transaxle,
- For G288 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
- For T350 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
Remove four (4) slave cylinder-to-clutch bellhousing bolts and remove slave cylinder (1) from transaxle. See Fig 1.