LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires & Wheels >> Tires/Wheels >> Removal >> Tire And Wheel Assembly - Aluminum Wheel

Tire And Wheel Assembly - Aluminum Wheel

  1. Raise and support the vehicle so that tire and wheel assembly clears ground level. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE) .
  2. If the vehicle is equipped with wheel center caps that cover the wheel nuts, remove the cap with an appropriate removal tool utilizing the notch formed into the wheel near valve stem. Use care not to damage the wheel coating.
    Fig 1: Tire And Wheel Mounting
    GC0041085Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove five wheel mounting (lug) nuts (3) from studs.
  4. Remove tire and wheel assembly (1) from hub.
scientia non olet · About LEMON Manuals