LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Suspension >> Hub / Bearing >> Removal >> Rear Drum Brake Vehicles

Rear Drum Brake Vehicles

NOTE: Before proceeding, (Refer to SUSPENSION/REAR - WARNING) .
  1. Raise and support the vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE) .
    Fig 1: Tire And Wheel Mounting Method
    GC0041085Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly (1).
    Fig 2: DRUM BRAKE MOUNTING TO AXLE
    GC0041091Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the brake drum retaining clips (5), then the drum (6). (Refer to BRAKES/HYDRAULIC/MECHANICAL/DRUM - REMOVAL) .
  4. Remove the dust cap (4) from the hub and bearing (7).
  5. Remove the hub nut (3), then slide the hub and bearing (7) from the spindle (10).
scientia non olet · About LEMON Manuals