LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Suspension >> Hub / Bearing >> Seal-Lower Ball Joint >> Removal

Seal-Lower Ball Joint: Removal

Fig 1: Seal Boot Removal
GC0020974Courtesy of DAIMLERCHRYSLER CORP.
1 - TOOL
2 - SEAL BOOT
3 - LOWER CONTROL ARM
  1. Remove the knuckle from the vehicle. (Refer to SUSPENSION/FRONT/KNUCKLE - REMOVAL) .
  2. Using a screwdriver or other suitable tool (1), pry the seal boot (2) off of ball joint.
scientia non olet · About LEMON Manuals