LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Steering Linkage >> Rack & Pinion Power Steering System >> Pump >> Pulley >> Removal >> Pulley - 2.2L Diesel

Pulley - 2.2L Diesel

NOTE: Before proceeding, (Refer to STEERING - WARNING) .
  1. Raise and support the vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE) .
    Fig 1: Engine Compartment Lower Silencer
    GC0021720Courtesy of DAIMLERCHRYSLER CORP.
    1 - ENGINE COMPARTMENT SILENCER
    2 - ACCESSORY DRIVE BELT SPLASH SHIELD
  2. Remove the lower engine compartment silencer assembly (1) and the accessory drive belt splash shield (2).
  3. Remove the accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELT - REMOVAL) .
    Fig 2: Pump Pulley Mounting
    GC0021723Courtesy of DAIMLERCHRYSLER CORP.
    1 - PULLEY MOUNTING BOLTS
    2 - RIGHT FRAME RAIL
    3 - PRESSURE HOSE FITTING
    4 - PULLEY
  4. Remove the three bolts (1) securing the pulley to the power steering pump. Remove the pulley.
scientia non olet · About LEMON Manuals