Pulley - 2.2L Diesel

Fig 1: Pump Pulley Mounting

Courtesy of DAIMLERCHRYSLER CORP.

1 - PULLEY MOUNTING BOLTS

2 - RIGHT FRAME RAIL

3 - PRESSURE HOSE FITTING

4 - PULLEY

Install the pump drive pulley (4). Install and tighten the three mounting bolts (1) to 28 N.m (21 ft. lbs.).
Install accessory drive belt. (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELT - INSTALLATION) .

Fig 2: Engine Compartment Lower Silencer
Courtesy of DAIMLERCHRYSLER CORP.

1 - ENGINE COMPARTMENT SILENCER

2 - ACCESSORY DRIVE BELT SPLASH SHIELD
Install the lower engine compartment silencer assembly (1) and the drive belt splash shield (2).
Lower the vehicle.