LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Steering Linkage >> Rack & Pinion Power Steering System >> Pump >> Hose-Supply >> Removal >> 2.2L Diesel

2.2L Diesel

NOTE: Before proceeding, (Refer to STEERING - WARNING) .
  1. Disconnect the battery negative (-) terminal.
    Fig 1: Engine Top Cover Mounting
    GC0021734Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the engine top appearance cover.
  3. Siphon as much fluid as possible from power steering fluid reservoir.
  4. Remove radiator fan. (Refer to COOLING/ENGINE/RADIATOR FAN - REMOVAL) .
    Fig 2: Hoses At Pump And Reservoir
    GC0021719Courtesy of DAIMLERCHRYSLER CORP.
    1 - FLUID RESERVOIR
    2 - SUPPLY HOSE
    3 - PRESSURE HOSE
  5. Remove the clamp securing the supply hose (2) to the power steering pump supply fitting, then remove the hose from the fitting.
  6. Remove the hose clamp securing supply hose (2) to the power steering fluid reservoir (1). Slide the hose off the end of the reservoir fitting and remove from vehicle.