LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Restraints >> Seat Belts >> Restraints System (Service Information) >> Service Information >> Standard Procedure >> Service After An Airbag Deployment >> Driver Airbag

Driver Airbag

After a Driver Airbag has been deployed due to a collision, the following MUST  be replaced:

  1. Driver Airbag
  2. Clockspring Assembly
  3. Steering Wheel
  4. Complete Steering Column Assembly with Lower Steering Column Coupler

All other airbag and vehicle components should be closely inspected following any airbag deployment, and should be replaced when visible damage is incurred.

WARNING: Do not connect the battery negative cable (Refer to ELECTRICAL/RESTRAINTS - DIAGNOSIS AND TESTING - AIRBAG SYSTEM)  . Personal injury or death may result if the system test is not performed first.
scientia non olet · About LEMON Manuals