Rear Seat Belt & Retractor - Pt27: Removal

Fig 1: Removing/Installing Seat Belt Anchor Nut

Courtesy of DAIMLERCHRYSLER CORP.

1. Release hood latch and open hood.
2. Remove the lower seat belt anchor nut (1).
   Fig 2: Removing/Installing Seat Belt & Retractor

   Courtesy of DAIMLERCHRYSLER CORP.
3. Remove the Lower Quarter Trim Panel the side in which you are removing the seat belt and retractor.
4. Remove the four bolts to the rear seat upper bolster.
5. Feed the seat belt webbing (1) through the top of the bolster.
6. Remove the one retaining bolt (2) to the seat belt retractor.
7. Remove seat belt and retractor from vehicle.