LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Restraints >> Seat Belts >> Restraints System (Service Information) >> Rear Center Seat Belt And Retractor >> Installation

Rear Center Seat Belt And Retractor: Installation

  1. Feed webbing and hardware through seat frame and install retractor.
  2. Install retractor bolt and tighten to 40 N.m (30 ft. lbs.).
  3. Connect locking cable to retractor.
  4. Unlock seat back latch.
  5. Re-trim rear seat back cover (Refer to BODY/SEATS/SEAT BACK COVER - INSTALLATION) .
  6. Install seat bezel.
  7. Attach Quick Connect Anchor.
scientia non olet · About LEMON Manuals