Front Seat Belt And Retractor - Pt27: Removal

Fig 1: Seat Belt Web Guide

Courtesy of DAIMLERCHRYSLER CORP.

1. Release hood latch and open hood.
2. Disconnect and isolate the battery negative cable.
   WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
3. Remove the seat belt from within the seat belt web guide.
   Fig 2: Lower Seat Belt Anchor Bolt & Upper Turning Loop Retaining Bolt

   Courtesy of DAIMLERCHRYSLER CORP.
4. Remove the seat belt anchor bolt.
5. Remove the upper turning loop retaining bolt.
   Fig 3: Tensioner Squib Connector

   Courtesy of DAIMLERCHRYSLER CORP.
6. Remove the Lower Quarter Trim Panel.
7. Disconnect the tensioner squib connector.
   Fig 4: Removing/Installing Retractor

   Courtesy of DAIMLERCHRYSLER CORP.
8. Remove the one bolt to the front seat belt retractor.
9. Remove retractor from vehicle.