LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Restraints >> Seat Belts >> DTCS B1B83 To B2101 >> Diagnosis And Testing >> B1B91-Driver Seat Track Position Sensor Configuration Mismatch >> Diagnostic Test

Diagnostic Test

  1. 1)  CHECK FOR ACTIVE INTERNAL FAULTS, IGNITION FAULTS, AND BATTERY FAULTS IN THE OCCUPANT CLASSIFICATION MODULE (OCM) 
    NOTE: Ensure the battery is fully charged.

    Turn the ignition on.

    With the scan tool, read Occupant Classification Module (OCM) DTCs.

    Does the scan tool display any active DTCs relating to internal faults, ignition faults, or battery faults? 

    Yes 

    1. Diagnose and repair the DTCs. Refer to the DTCS B1203 TO B1B19 & DIAGNOSTIC CODE INDEX article, and other appropriate DIAGNOSTICS articles.

    No 

    1. Go To  2).
  2. 2)  VERIFY THAT B1B91-DRIVER SEAT TRACK POSITION SENSOR CONFIGURATION MISMATCH IS ACTIVE 

    With the scan tool, erase OCM DTCs.

    Turn the ignition off, wait 10 seconds and then turn the ignition on.

    Wait 2 minutes, and then with the scan tool, read OCM DTCs.

    Does the scan tool display active: B1B91-DRIVER SEAT TRACK POSITION SENSOR CONFIGURATION MISMATCH? 

    Yes 

    1. Go To  3).

    No 

    1. Perform the *OCS VERIFICATION TEST-VER. 1. (Refer to *OCS VERIFICATION TEST - VER 1 )
  3. 3)  VERIFY WIRING 

    Turn the ignition off.

    Inspect the driver and passenger seat wiring for Seat Position Sensors.

    Are Seat Position Sensor(s) present? 

    Yes 

    1. Replace the OCM in accordance with the Service Information.
    2. Perform the *OCS VERIFICATION TEST-VER. 1. (Refer to *OCS VERIFICATION TEST - VER 1 )

    No 

    1. Perform the *OCS VERIFICATION TEST-VER. 1. (Refer to *OCS VERIFICATION TEST - VER 1 )
scientia non olet · About LEMON Manuals