HVAC Systems (Service Information): Distribution: Outlets-Air: Removal
NOTE:
Center bezel air outlet shown in illustration. Other instrument panel air outlets similar.
- Depending on the air outlet being serviced, remove the instrument cluster bezel (Refer to BODY/INSTRUMENT PANEL/BEZEL-CLUSTER - REMOVAL)
, instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/BEZEL-CENTER - REMOVAL)
or the passenger side airbag cover (Refer to ELECTRICAL/RESTRAINTS/COVER-PASSENGER AIRBAG - REMOVAL)
.NOTE: If the foam seal on the air outlet is deformed or damaged, it must be replaced.
- Remove the three screws or nuts (1) (depending on application) that secure the air outlet(s) (2) to the bezel or cover (3) (depending on application) and remove the outlet(s).