LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems (Service Information) >> Controls >> Switch-A/C Low Pressure >> Removal

Switch-A/C Low Pressure: Removal

NOTE: It is not necessary to discharge the refrigerant system to replace the A/C low pressure switch.
Fig 1: A/C Low Pressure Switch - Typical
GC0020905Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Disconnect the wire harness connector (3) from the A/C low pressure switch (2).
  3. Remove the A/C low pressure switch from the A/C accumulator (1) and remove and discard the O-ring seal.