LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (G288 Manual Transmission - Overhaul) >> Output Shaft >> Synchronizer >> Disassembly

Output Shaft: Synchronizer: Disassembly

WARNING: This page is about a different variant/trim than selected.
Fig 1: Synchronizer Disassembly
GC0022218Courtesy of DAIMLERCHRYSLER CORP.
1 - SYNCHRONIZER HUB
2 - SYNCHRONIZER SLEEVE
3 - STRUT ASSEMBLY
  1. Remove synchronizer sleeve (2). See Fig 1. Three synchronizer strut assemblies (3) will free from hub (1).
  2. Inspect all components for wear and replace as necessary.
scientia non olet · About LEMON Manuals